The pump bowls for submersible pumps manufactured by our factory adopt mature casting technologies including silica sol casting, water glass casting and sand casting. Using cast iron and cast steel as main raw materials, our pump bowls are integrally formed without welding joints, which reduces hydraulic power loss of pumps and improves operational efficiency.
This product is compatible with various submersible pumps such as QJ deep well submersible pumps, WQ sewage submersible pumps and vertical turbine pumps. We provide bulk customized non-standard submersible pump bowls for complete pump manufacturers, pump component suppliers, distributors, well drilling service providers and municipal water treatment suppliers.

Parameters
| Item | Custom Submersible Pump Bowl |
| Compatible Pump Diameter | 2 inch, 3 inch, 4 inch, 5 inch, 6 inch, 8 inch |
| Material | Gray cast iron, Stainless Steel, Special Steel |
| Surface Hardness | Cast iron HB180–240; Cast Stainless Steel HB140-280 |
| Pressure Rating | Maximum 16bar |
| Flow Rate | 5–400 m³/h |
| Head Range | Up to 180 m |
| Connection Type | Internal thread / Flange connection |
| Surface Treatment | Sandblasting, painting, electroplating, passivation, oil dipping, etc. |
| Machining Tolerance | Silica sol casting CT4–CT6, water glass casting CT7–CT8, sand casting CT8–CT9, CNC precision machining ±0.02 mm |
| MOQ | Starting from 50 pieces |
Advantages of Submersible Pump Bowl

High quality and low cost for gray cast iron pump bowls:
Our gray cast iron pump bowls adopt stable materials such as HT200 and HT250 with uniform hardness. The machined surfaces are flat and not prone to pressure leakage to reduce the rework rate.
Our factory owns complete production lines with a regular shipment volume of 450 to 550 tons per month. The output can reach 700 tons per month with day and night shifts operated in peak seasons, featuring sufficient production capacity and stable supply.
Low prices for bulk orders together with high finished product qualification rate make the overall cost more controllable.
Ductile iron submersible pump bowls feature high delivery quality and favorable comprehensive cost
Pressure leakage is the biggest hidden trouble of ductile iron pump bowls. Our factory adopts resin sand casting and lost foam casting processes to avoid defects including shrinkage cavities, shrinkage porosity and air holes, and all products undergo 100% pressure testing.
The spheroidization quality of pump bowls determines the long-term pressure resistance and water hammer impact resistance of pump bodies. Our factory maintains stable spheroidization quality and can provide material test reports and metallographic reports for relevant inspections.
Products of the same batch have minor dimensional deviations for convenient replacement.
Stainless steel pump bowls are produced in strict 1:1 accordance with drawings with guaranteed dimensional accuracy and quality
Stainless steel submersible pump bowl are manufactured via the silica sol investment casting process with smooth surfaces. Overall dimensions, mounting hole positions and other features are fully reproduced within the drawing-specified tolerances.
Premium materials including 304, 316L and 2205/2507 stainless steel are adopted, with raw material certificates and factory spectral test reports provided.
The high precision of pump bowl blanks simplifies machining procedures and cuts costs for customers.
Application Scenarios And Material Selection For Submersible Pump Bowl
| Application Scenarios | Preferred Material | Alternative Material |
| Urban and rural deep well water supply | QT450-10 ductile iron | HT250 (low-cost small pumps) |
| Farmland and orchard irrigation | HT250 gray cast iron | QT450 (sediment-laden working conditions) |
| Municipal sewage discharge and rainwater drainage | QT450-10 ductile iron | HT250 (small simple sewage discharge) |
| Underground mine dewatering and drainage | QT500-7 ductile iron | WCB cast steel (deep well / explosion-proof emergency rescue) |
| Building foundation pit dewatering | QT450-10 ductile iron | HT250 (temporary short-term water pumping) |
| Water plant and reservoir water transfer | QT450-10 ductile iron | WCB cast steel (high-pressure main pipeline) |
| Water circulation for aquaculture | HT250 gray cast iron | No material upgrade required |
| Slightly corrosive industrial wastewater | QT450 with anti-corrosion coating | Cast steel is not recommended |
| Large vertical turbine pump stations | QT500-7 ductile iron | WCB cast steel (high-pressure main units) |
FAQ
Q: How many years can a cast iron submersible pump bowl last?
A: Its service life mainly depends on the operating environment of the pump, ranging from 1 to 15 years under different working conditions. Pumps are mostly scrapped due to aging seals, motors and wearing parts, while the submersible pump bowl can be repaired and refurbished for continued service. For water sources with sediment, customized high-hardness castings are available to extend service life by over 30%.
Q: What types of submersible pump bowls do you manufacture?
A: Our products include QJ deep well submersible pump diffusers, WQ sewage submersible pump diffusers, vertical turbine pump diffusers, stainless steel corrosion-resistant diffusers, and other non-standard OEM customized pump bowls.
Q: If we order submersible pump bowls from you, can you complete anti-corrosion coating or painting on the same order?
A: Yes. We have an independent painting workshop and can apply customer-specified anti-corrosion coatings as required.
Q: Which casting process is better for WCB material?
A: There is no absolute superior or inferior casting process; the selection depends on your specific requirements and the dimensions of the pump casing. For instance, resin sand casting is recommended for large workpieces with top-tier quality requirements. You do not need to focus on the specific production process, only whether the finished product meets your performance standards. We can discuss and select the most suitable casting process together with you.
Q: Can submersible pump bowls be shipped in a full container mixed with other pump castings?
A: Yes, we support mixed container loading. Our foundry also produces various pump casting spare parts such as impellers, pump casings and pump brackets. Consolidated shipments help you cut procurement and logistics costs.
Q: What material grades are available for selection?
A: We supply most common materials for submersible pump bowl. The available grades are listed belowsubmersible pump bowl.
Class35, Class 40, 60-40-18, 70-50-05, 80-60-03, ASTM A436 Type 2, WCA, WCB, WCC, ASTM A148 Grade 90-60, CF8, CF3M, CD3MN.

Hot Tags: submersible pump bowl, China submersible pump bowl manufacturers, suppliers, factory, 17 4 ph investment casting, stainless steel investment casting parts, stainless steel casting, investment casting ss304, investment casting sand, investment wax

